Product code: Rupert Neve Designs RND 551 Inductor store EQ for API 500 Series SSL
Artikel sind zu haben solange sie zu sehen sind.
Nur Abholung (Berlin) oder Überweisung
Kein Paypal, kein Ebay Kleinanzeigen "Direkt Kaufen" Shit. Habe dort mal 2 monate gewartet bis ich mein Geld zurück bekam. Never ever again!
OK ich habe zwei EQs, preis gilt natürlich für einen, wer beide kauft bekommt Rabatt.
Selling my two 551 Inductor EQ's from Rupert Neve Designs for the API 500 Series Lunchbox format as i will try out some other EQ's like the API 550A and Pultec 500X for example. Price is for one of course, buy two get them cheaper.
They are in Great Condition, 100% working of course, Non Smoking Studio.
Any Questions just ask. (german or english)
3-Band Inductor (coil) EQ - 500 Series
Low EQ: +/-15 dB shelf or peak
Selectable for 35 Hz, 60 Hz, 100 Hz or 220 Hz
Mid EQ: +/-15 dB with 6 centre frequencies: 200 Hz, 350 Hz, 700 Hz, 1.5 kHz, 3 kHz and 6 kHz
High / Peak switch to increase the Q-factor
Hi shelf: +/-15 dB shelf or peak, selectable for 8 kHz and 16 kHz
Lo cut: 12 dB / octave design at 80 Hz
Rupert Neve custom transformer
Design: API series 500 rack format
The vintage EQ tone you know & love.
The 551 is the only equalizer for the 500 Series actually designed by Rupert Neve. Featuring 3 bands of EQ inspired by Mr. Neve's most prized vintage designs, along with custom-wound inductors, transformers and class-A gain blocks, the 551 brings the thick, powerful lows and sweet highs of Rupert's classics to the 500-Series format.
The “Best-Of” EQ
The 551's 3-band, custom-tapped inductor EQ was inspired by our favorite elements of Rupert's vintage EQ designs. The low frequency band is designed to produce a creamy, resonant bass response similar to a vintage 1064 – but unlike the vintage modules, the LF band on the 551 can be used as either a shelf or a peak filter, adding store punch, dimension, and control to your low end.
The midrange band is based on that of the 1073, ideal for sweetening vocals and instruments while bringing them forward in a mix, and its proportional “Q” response makes it well-suited for minimizing problematic frequencies. The high frequency band is a hybrid vintage / modern design, blending inductor circuitry with capacitor-based topologies to achieve vintage tones with enhanced control. The High Pass filter is a 12dB/octave design with a fixed 80Hz frequency, and can be used in tandem with the low frequency EQ to add low-end presence without clouding the source material.
As with Rupert's most prized classic designs, each EQ section uses low-feedback, class-A discrete electronics to prevent low-level artifacts and harshness from detracting from the tonal shaping. However, this new circuit is a decidedly modern design with updated techniques and components that were simply not available 50 years ago, and is definitely not a “clone”.
What Are Inductors?
Inductors are wires wound around a coil that provide a form of frequency-dependant resistance. When they saturate, they bring out beautifully musical harmonics that give your tracks the smooth, polished sound that has made Rupert's consoles and equipment so desirable for over fifty years. This is what makes them different from capacitor-based EQ designs, which do a great job at surgical equalization. But inductors provide the tone.
While it is certainly possible to create a functioning EQ using off-the-shelf inductors, we choose to use our own custom inductors for the 551. This attention to detail in controlling variables such as the winding and core materials in relation to the surrounding circuitry allows the 551 to capture the vitality and personality of Rupert's classic designs.
Any questions just ask
Bei fragen einfach anmailen.
Nur Abholung (Berlin) oder Überweisung
Kein Paypal, kein Ebay Kleinanzeigen "Direkt Kaufen" Shit. Habe dort mal 2 monate gewartet bis ich mein Geld zurück bekam. Never ever again!
OK ich habe zwei EQs, preis gilt natürlich für einen, wer beide kauft bekommt Rabatt.
Selling my two 551 Inductor EQ's from Rupert Neve Designs for the API 500 Series Lunchbox format as i will try out some other EQ's like the API 550A and Pultec 500X for example. Price is for one of course, buy two get them cheaper.
They are in Great Condition, 100% working of course, Non Smoking Studio.
Any Questions just ask. (german or english)
3-Band Inductor (coil) EQ - 500 Series
Low EQ: +/-15 dB shelf or peak
Selectable for 35 Hz, 60 Hz, 100 Hz or 220 Hz
Mid EQ: +/-15 dB with 6 centre frequencies: 200 Hz, 350 Hz, 700 Hz, 1.5 kHz, 3 kHz and 6 kHz
High / Peak switch to increase the Q-factor
Hi shelf: +/-15 dB shelf or peak, selectable for 8 kHz and 16 kHz
Lo cut: 12 dB / octave design at 80 Hz
Rupert Neve custom transformer
Design: API series 500 rack format
The vintage EQ tone you know & love.
The 551 is the only equalizer for the 500 Series actually designed by Rupert Neve. Featuring 3 bands of EQ inspired by Mr. Neve's most prized vintage designs, along with custom-wound inductors, transformers and class-A gain blocks, the 551 brings the thick, powerful lows and sweet highs of Rupert's classics to the 500-Series format.
The “Best-Of” EQ
The 551's 3-band, custom-tapped inductor EQ was inspired by our favorite elements of Rupert's vintage EQ designs. The low frequency band is designed to produce a creamy, resonant bass response similar to a vintage 1064 – but unlike the vintage modules, the LF band on the 551 can be used as either a shelf or a peak filter, adding store punch, dimension, and control to your low end.
The midrange band is based on that of the 1073, ideal for sweetening vocals and instruments while bringing them forward in a mix, and its proportional “Q” response makes it well-suited for minimizing problematic frequencies. The high frequency band is a hybrid vintage / modern design, blending inductor circuitry with capacitor-based topologies to achieve vintage tones with enhanced control. The High Pass filter is a 12dB/octave design with a fixed 80Hz frequency, and can be used in tandem with the low frequency EQ to add low-end presence without clouding the source material.
As with Rupert's most prized classic designs, each EQ section uses low-feedback, class-A discrete electronics to prevent low-level artifacts and harshness from detracting from the tonal shaping. However, this new circuit is a decidedly modern design with updated techniques and components that were simply not available 50 years ago, and is definitely not a “clone”.
What Are Inductors?
Inductors are wires wound around a coil that provide a form of frequency-dependant resistance. When they saturate, they bring out beautifully musical harmonics that give your tracks the smooth, polished sound that has made Rupert's consoles and equipment so desirable for over fifty years. This is what makes them different from capacitor-based EQ designs, which do a great job at surgical equalization. But inductors provide the tone.
While it is certainly possible to create a functioning EQ using off-the-shelf inductors, we choose to use our own custom inductors for the 551. This attention to detail in controlling variables such as the winding and core materials in relation to the surrounding circuitry allows the 551 to capture the vitality and personality of Rupert's classic designs.
Any questions just ask
Bei fragen einfach anmailen.